Assembly Stage #2
Attach Rear Stabilizer and Seat Rail to
Seat Assembly
Assembly hardware required: | (4) M8 Allen Bolts 16mm (item #5) |
| (4) Flat Washers Ø8 * Ø16 * 2T (item#15) |
| (2) Flat Head Screws (item #12) |
Step 5: Attach the REAR STABILIZER (#17) to the SEAT RAIL POST (#16) with 2 FLAT HEAD SCREWS (#12). Tighten bolts.
Step 6: Attach SEAT RAIL (#18) to SEAT RAIL POST (#16) with 4 FLAT WASHERS (#15) and 4 ALLEN BOLTS (#5). Tighten bolts
Step 7: Insert SEAT PIN ADJUSTMENT KNOB (#3) into SEAT FRAME (#8). Slide the seat assembly from stage 1 onto the SEAT RAIL (#9). Tighten seat assembly to the rail with the SEAT PIN ADJUSTMENT KNOB (#3). Insert HR CABLE (#47) into HR input on the back of the seat assembly (inset picture).