HP Pro 4300 C9H70UT C9H70UT#ABA manual Output delivery assembly 2

CAUTION	The rear face-down output-bin-sensor (callout 1) wire is routed through a notch (callout 2) on the
	output delivery system at the gear end of the assembly. When you remove the assembly, make
	sure that this wire-harness is carefully removed from the notch and is not damaged.

3.Lift up the gear end of the assembly slightly and move the assembly toward the formatter assembly to remove it.

2

1

Figure 103. Output delivery assembly (2 of 2)

164 Removing and replacing parts Q2431-90912