HP Pro 4300 C9H70UT C9H70UT#ABA manual Transfer assembly 3

4.Push the paper-feed and transfer assembly wire-harnesses through the hole in the chassis (callout 5).

Reinstall note The plastic clip (callout 5) that lines the hole in the chassis protects the wire-harnesses from chaffing on an exposed edge of the sheet-metal chassis. This clip can easily become dislodged and lost. Make sure that this clip is installed when you replace the transfer assembly.

5

Figure 159. Transfer assembly (3 of 5)

5.On the left side, remove 16 screws (callout 6; 15 if the paper-feed assembly has been removed).

6

6

6

Figure 160. Transfer assembly (4 of 5)

202 Removing and replacing parts Q2431-90912