HP Pro 4300 C9H70UT C9H70UT#ABA manual Tray 2 feed rollers 2

Tray 2 feed rollers

1.Remove tray 2 and place it on a level work surface. Locate and open the cover (arrow) that is next to the roller in tray 2.

Figure 65. Tray 2 feed rollers (1 of 4)

2.Pinch the blue latch that is on the left side of the roller. Slide the roller off of the shaft (arrows).

1

Figure 66.	Tray 2 feed rollers (2 of 4)
CAUTION	When you install the roller, make sure that it locks into place. Verify that the roller is correctly
	oriented, and that the round, black spacer next to the roller is correctly positioned against the
	locking pin on the shaft (callout 1).

Q2431-90912 Chapter 6 Removing and replacing parts 141