HP Pro 4300 C9H70UT C9H70UT#ABA manual PCL sub-submenu a submenu in the printing submenu

Table 21. Printing submenu (continued)

Item	Values	Explanation
OVERRIDE A4/	*NO	Use this item to instruct the printer to print an A4-size job on
LETTER	YES	letter-size media if A4-size paper is not loaded in the printer
		(or vice versa).
MANUAL FEED	*OFF	Use this item to instruct the printer to feed the media
	ON	manually from tray 1, rather than automatically from a tray. If
		MANUAL FEED=ON and tray 1 is empty, the printer goes offline
		when it receives a print job. MANUALLY FEED [PAPER SIZE]
		appears on the printer control-panel display.
COURIER FONT	*REGULAR	Specify the version of Courier font to use:
	DARK	REGULAR: The internal Courier font available on the
		HP LaserJet 4 series printers.
		DARK: The internal Courier font available on the
		HP LaserJet 4200/4300 series printers.
WIDE A4	*NO	Changes the number of characters that can be printed on a
	YES	single line of A4-size paper.
		NO: Up to 78 10-pitch characters can be printed on one line.
		YES: Up to 80 10-pitch characters can be printed on one line.
PRINT PS ERRORS	*OFF	Use this item to tell the printer whether or not to print a
	ON	postscript (PS; an object orientated computer language used
		to describe the layout of documents to be printed) error page
		prints.
		OFF: PS error page never prints.
		ON: PS error page prints when PS errors occur.

PCL sub-submenu (a submenu in the printing submenu)

The following section lists the settings and their possible values in the PCL submenu. The default value for each setting is the one that has an asterisk (*) next to it.

Table 22. PCL submenu

Item	Values	Explanation
FORM LENGTH	5 to 128 (*60)	Use this item to set vertical spacing from 5 to 128 lines
		for the default paper size.
ORIENTATION	*PORTRAIT	Use this item to select default page orientation.
	LANDSCAPE	Note
		It is best to set the page orientation in the software
		program or printer driver. (Program and printer-driver
		settings override control-panel settings.)
FONT SOURCE	*INTERNAL	INTERNAL: Internal fonts.
	SOFT	SOFT: Permanent soft fonts. This option is available
	SLOT 1, 2, or 3
		only if it is installed.
		SLOT 1, 2, or 3: Fonts stored in one of the three DIMM
		slots. This option is available only if it is installed.
FONT NUMBER	*0 to 999	The printer assigns a number to each font and lists the
		numbers on the PCL Font List. The font number
		appears in the Font # column of the printout.
FONT PITCH	0.44 to 99.99 (*10.00)	Use this item to select the font pitch. This item might
		not appear, depending on the selected font.

Q2431-90912 Chapter 3 Printer operation 45