HP Pro 4300 C9H70UT C9H70UT#ABA manual Duplexing pendulum assembly 2

CAUTION	The gears in this assembly are not captive when the assembly is removed. They can easily slide
	off of the shafts. Handle the assembly carefully and place it gear-side up on your workstation to
	prevent the gears from coming off of the shafts.

3.Pull the duplexing pendulum assembly toward the laser/scanner until the upper gear-drive shaft clears the hole in the chassis, and then remove the assembly.

Figure 105. Duplexing pendulum assembly (2 of 2)

166 Removing and replacing parts Q2431-90912