Formatter assembly

Hint

If possible, print a menu map and a configuration page. See“Menu map” on page 240 and

 

“Configuration page” on page 241. Use the information on the these pages to restore any user-set

 

product configuration options after you install a replacement formatter.

 

 

1. Remove the formatter cover. See “Formatter cover” on page 145.

2. Remove two screws (callout 1).

3. Slide the formatter assembly toward the rear of the printer to release it. Remove the formatter assembly.

1

Figure 99. Formatter assembly

Reinstall notel If you install a replacement formatter perform a NVRAM initialization. See “NVRAM initialization” on page 251. Then use the control-panel display to access the service menu and enter the total page count, the maintenance count, the service ID, the cold reset paper size, and the serial number. See “Service menu (service PIN codes)” on page 249. Finally, reset the printer’s display language to the customer’s choice. See “Setting the control-panel display language” on page 38.

Q2431-90912

Chapter 6 Removing and replacing parts 161

Page 181
Image 181
HP Pro 4300 C9H70UT C9H70UT#ABA manual Formatter assembly