HP Pro 4300 C9H70UT C9H70UT#ABA Running the cleaning page manually

	Running the cleaning page manually
	In order for the cleaning page to work properly, print the page on copier-grade paper (not bond,
	heavy, or rough paper).
Hint	If you have an optional duplexer installed, this cleaning method is the only one you can use. To
	make sure that automatic cleaning option is not selected. To ensure good print quality, run the
	cleaning page every time the print cartridge is replaced. If you need to run the cleaning page
	frequently, try using a different type of paper for everyday printing.

To run the cleaning page manually

1.If a duplexer is installed, open the rear output bin.

2.Press the SELECT ( ) button to open the menus.

3.Use the UP ARROW ( ) button or the DOWN ARROW ( ) button to scroll to CONFIGURE DEVICE, and then press the SELECT ( ) button.

4.Use the UP ARROW ( ) button or the DOWN ARROW ( ) button to scroll to PRINT QUALITY, and then press the SELECT ( ) button.

5.Use the UP ARROW ( ) button or the DOWN ARROW ( ) button to scroll to CLEANING PAGE, and then press the SELECT ( ) button.

6.Follow the instructions on the cleaning page to complete the cleaning process.

7.If a duplexer is installed, close the rear output bin.

You might need to create and process a cleaning page more than once. When toner has been cleaned from the fuser assembly, shiny black spots appear on the page’s black strip. If white spots appear on the black strip, create and process another cleaning page.

Figure 2.Sample cleaning page

56 Printer maintenance Q2431-90912