HP Pro 4300 C9H70UT C9H70UT#ABA manual Sheet feeder media-size sensor 1

500-sheet feeder media-size sensor

1.Remove the 500-sheet feeder PCA. See “500-sheet feeder control PCA” on page 207.

2.Remove two screws (callout 1).

1

2

Figure 169. 500-sheet feeder media-size sensor (1 of 2)

3.Push the locking tab (figure 169; callout 2) and slide the sensor toward the front of the feeder to release it. Remove the sensor.

Figure 170. 500-sheet feeder media-size sensor (2 of 2)

Reinstall note When you install the media sensor, verify that the locator pins are correctly positioned in the corresponding holes in the chassis.

208 Removing and replacing parts Q2431-90912