HP Pro 4300 C9H70UT C9H70UT#ABA Tray 1 1, Slide the tray 1 door to the right and remove it

Tray 1

1.Open tray 1. Use your fingers to gently pry the paper-guide slide-pin hinges out of the hinge slots on the tray 1 door to release the pins.

Figure 85.	Tray 1 (1 of 6)
	2. Slide the tray 1 door to the right and remove it.

1

2

Figure 86. Tray 1 (2 of 6)

Reinstall note When you install the tray 1 door, the door-stop pin (callout 1) must be installed in the stop receptacle on the door (callout 2) so that the door will open and close properly.

152 Removing and replacing parts Q2431-90912