1,500-sheet feeder media-size sensor

1.Remove the following assemblies:

Door. See “1,500-sheet feeder door” on page 215.

Rear and right-side covers. See “1,500-sheet feeder rear cover” on page 217 and “1,500-sheet feeder right-side cover” on page 218.

2.Unplug the sensor wire-harness at the sensor (callout 1).

3.Remove one screw (callout 2).

4.Remove the sensor.

CAUTION

There are two plastic locator pins on the back of the sensor. Be careful not to break them when

 

the sensor is removed.

 

 

2

1

Figure 193. 1,500-sheet feeder media-size sensor

Reinstall note When you install the sensor, verify that the sensor body is flush with the chassis.

Q2431-90912

Chapter 6 Removing and replacing parts 221

Page 241
Image 241
HP Pro 4300 C9H70UT C9H70UT#ABA manual sheet feeder media-size sensor