HP Pro 4300 C9H70UT C9H70UT#ABA manual Stacker or stapler/stacker, LED blinks in amber

Table 41. Alphabetical printer messages (continued)

Message	Description	Action
OUTPUT BIN 1 FULL	The stacker or stapler/stacker	1. Remove the media from the
REMOVE ALL PAPER	output bin is full and must be		output bin.
FROM BIN	emptied in order to continue	2. If the error persists, verify that
	printing.		the output bin flapper (the
Note:			four plastic paddles hanging
The stacker or stapler/stacker			down in front of the output bin
LED blinks in amber.			rollers) can move freely.
		3. Replace the stacker or
			stapler/stacker.
OUTPUT PAPER PATH OPEN	The jam-access door or the staple	1.	Press the HELP (	) button
	cartridge door is open.		for detailed information.
Note:		2.	Press the UP ARROW ( )
The stacker or stapler/stacker LED			button and the
blinks in amber.			DOWN ARROW (	) button to
			step through the instructions.
		3. Close the open door.
		4. If this message persists,
			replace the stacker or stapler/
			stacker.
PERFORM PRINTER MAINTENANCE	To ensure optimum print quality,	Install an HP LaserJet 4200/4300
	the printer prompts you to perform	printer maintenance kit. See the
alternates with	routine maintenance every	instructions that come with this kit.
	200,000 pages (default setting).
READY			-or-
For menus press	● Q2429A; 110 V printer kit
	for the HP LaserJet 4200	Continue printing and order a
	● Q2436A; 110 V printer kit	printer maintenance kit
	for the HP LaserJet 4300	For information about how to
	● Q2430A; 220 V printer kit
		order a maintenance kit, see
	for the HP LaserJet 4200
		chapter 8 in this manual.
	● Q2437A; 220 V printer kit
	for the HP LaserJet 4300
PERFORMING UPGRADE	A firmware upgrade is in progress.	CAUTION
		Do not turn the printer off until the
		printer returns to the Ready state.
		The printer will be damaged if the
		power is turned off during a
		firmware upgrade.
PRINTING...	The printer is generating the	Follow the instructions on the
REGISTRATION PAGE	registration page. The printer will	printed pages.
	return to the Ready state when
	the page is completed.

Q2431-90912 Chapter 7 Troubleshooting 265