HP Pro 4300 C9H70UT C9H70UT#ABA manual Configure Device menu, Printing submenu

Configure Device menu

This menu contains administrative functions in the following submenus:.

●Printing submenu

• PCL submenu

●Print quality submenu

●System setup submenu

●Stapler/stacker submenu

●I/O submenu

Printing submenu

Some items on this menu are available in the software program or the printer driver (if the appropriate driver is installed). Program and printer-driver settings override control-panel settings. In general, it is better to change these settings in the printer driver, if applicable.

The following section lists the settings and their possible values in the Printing submenu. The default value for each setting is the one that has an asterisk (*) next to it.

Table 21. Printing submenu

Item	Values	Explanation
COPIES	*1 to 32000	The default number of copies can be set to any number from
		1 to 32000. Use the UP ARROW ( ) button or the
		DOWN ARROW ( ) button to select the number of copies.
		This setting applies only to print jobs tin which the number of
		copies is not specified in the software program or the printer
		driver, such as a MS-DOS, UNIX, or Linux application.
		Note
		It is best to set the number of copies in the program or printer
		driver. (Program and printer-driver settings override
		control-panel settings.)
DEFAULT PAPER	ANY	The default image size for media. (The item name changes
SIZE	*LETTER	from paper to envelope as you scroll through the available
	LEGAL	sizes.) This setting applies only to print jobs in which the
	EXECUTIVE	paper size is not specified in the software program or the
	A4	printer driver.
	A5	Note
	B5 (ISO)	It is best to set the number of copies in the program or printer
	B5 (JIS)	driver. (Program and printer-driver settings override
	EXECUTIVE (JIS)	control-panel settings.)
	DPOSTCARD (JIS)
	16K
	ENVELOPE #10
	ENVELOPE MONARCH
	ENVELOPE C5
	ENVELOPE DL
	ENVELOPE B5
	CUSTOM
DEFAULT CUSTOM	UNIT OF MEASURE	The default custom paper size for tray 1 or any 500-sheet
PAPER SIZE	X DIMENSION	tray. This menu appears only if the Custom-Standard switch
	Y DIMENSION	in the selected tray is set to Custom.
PAPER	*STANDARD OUTPUT	Use this item to configure the output destination. Only
DESTINATION	OPTIONAL BIN 1	installed bins appear on the menu.
DUPLEX	*OFF	Appears only if an optional duplex printing accessory is
	ON	installed. Set the value to ON to print on both sides (duplex) or
		OFF to print on one side (simplex) of a sheet of paper.

44 Printer operation Q2431-90912