HP Pro 4300 C9H70UT C9H70UT#ABA manual Laser/scanner 1

Laser/scanner assembly

1.Remove the following assemblies:

●Top cover. See “Top cover” on page 146.

●Right-side cover. See “Right-side cover” on page 149.

2.Unplug the laser/scanner wire-harness connector from the DC controller PCA (location J84; callout 1). Remove the laser/scanner wire-harness from the wire guide (callout 2).

2

1

Figure 117. Laser/scanner (1 of 4)

3.Unplug the laser/scanner wire-harness (callout 3) from the laser/scanner PCA

3

Figure 118. Laser/scanner (2 of 4)

Q2431-90912 Chapter 6 Removing and replacing parts 173