HP Pro 4300 C9H70UT C9H70UT#ABA manual Stapler/stacker submenu

Table 24. System setup submenu (continued)

Item	Values	Explanation
RAM DISK	OFF	Use this item to configure the RAM disk.
	*AUTO	OFF: The RAM disk is disabled.
		AUTO: The printer determines the optimal RAM-disk size
		based on the amount of available memory.
		Note
		If you change the setting from OFF to AUTO, the printer
		automatically reinitializes when it becomes idle.
LANGUAGE	*ENGLISH	Selects the language for the messages that appear on
	(Selections are	the printer control-panel display.
	available
	depending on
	the installed
	fonts.)

Stapler/stacker submenu

This submenu allows you to select settings for the optional stapler/stacker, if one is installed.

Some items on this menu are available in the software program or the printer driver (if the appropriate driver is installed).

The following section lists the settings and their possible values in the Stapler/stacker submenu. The default value for each setting is the one that has an asterisk (*) next to it.

Table 25. Stapler stacker submenu

Item	Values	Explanation
STAPLER/STACKER	● STAPLES	Use this item to specify whether or not print jobs are
● STAPLES	*NONE	stapled.
● STAPLES OUT	ONE	NONE: Turns off stapling.
		ONE: Turns on stapling.
		Note
		Selecting the stapler at the printer control panel
		changes the default setting to staple. It is possible that
		all print jobs will be stapled.
	● STAPLES OUT	Use this item to tell the printer how to behave if the
	*STOP	stapler runs out of staples, as indicated by the STAPLER
	CONTINUE	OUT OF STAPLES message on the printer control-panel
		display.
		STOP: The printer stops printing until you refill the
		stapler.
		CONTINUE: The stapler accepts print jobs if it is out of
		staples, but the pages will not be stapled.
		For information about ordering a new staple cartridge,
		see chapter 8.

Q2431-90912 Chapter 3 Printer operation 51