HP Pro 4300 C9H70UT C9H70UT#ABA manual sheet feeder lifter-drive assembly 2

4.Remove seven screws (callout 4) and then remove the bracket (callout 5).

5.Slide the spring-gear assembly (callout 6) away from the chassis until the gear shaft clears the hole in the chassis. Slide the assembly towards the rear of the feeder and then remove it.

6

4

5

Figure 195. 1,500-sheet feeder lifter-drive assembly (2 of 4)

6.Release the lifter-gear shaft-collar locking pin and rotate the collar until the inner locking tabs align with the corresponding holes in the bracket. Slide the collar off of the shaft.

Figure 196. 1,500-sheet feeder lifter-drive assembly (3 of 4)

Q2431-90912 Chapter 6 Removing and replacing parts 223