HP Pro 4300 C9H70UT C9H70UT#ABA manual Registration assembly 3

CAUTION	Do not remove the screw (callout 4) that holds the registration-roller plate return spring in place.
	It is not necessary to remove this spring.

4.Use the green handle (located at the right edge of the registration plate) to raise the registration-roller plate. Remove three screws (two large self-tapping screws on the right-hand side and one silver machine screw; callout 5). Remove the registration assembly.

5

4

Figure 156. Registration assembly (3 of 3)

Q2431-90912 Chapter 6 Removing and replacing parts 199