HP Pro 4300 C9H70UT C9H70UT#ABA manual Tray 1 3

3.Firmly pull both sides of the tray 1 sensor arm cover down to release it from the shaft.

Figure 87.	Tray 1 (3 of 6)
Reinstall note	When the tray 1 sensor cover is installed, verify that the sensor arms move freely.
Note	Be sure to look at how the spring (callout 3) is positioned before removing it.
	4. Rotate tray 1 upward and release the return spring (callout 3) from the bottom of tray 1.

3

Figure 88. Tray 1 (4 of 6)

Q2431-90912 Chapter 6 Removing and replacing parts 153