HP Pro 4300 C9H70UT C9H70UT#ABA manual Control-panel assembly 1

Control-panel assembly

CAUTION	Always remove the top cover before attempting to remove the control panel. If you drop any of
	the control-panel mounting screws into the printer when you remove the control panel, they might
	be difficult to recover. Severe damage to the printer can result if the power is turned on when
	loose screws are inside the unit.
	1.	Remove the top cover. See “Top cover” on page 146.
	2.	Place the top cover upside-down on a padded work surface.
	3.	Remove six screws (callout 1).

1

Figure 94. Control-panel assembly (1 of 4)

Q2431-90912 Chapter 6 Removing and replacing parts 157