HP Pro 4300 C9H70UT C9H70UT#ABA manual Main motor 1, Remove it

Main motor

1.Remove the following assemblies:

●Top cover. See “Top cover” on page 146.

●Right-side cover. See “Right-side cover” on page 149.

2.Unplug the power-supply ribbon cables and the main motor harness connector from the DC controller PCA (locations J80, J81, and J98; callout 1). Unweave all of the wire-harnesses from the wire guide (callout 2).

1

2

Figure 123.	Main motor (1 of 3)
	3. Push in on the wire guide locking tabs (callout 3) to release the guide and push down to
	remove it.

3

Figure 124. Main motor (2 of 3)

Q2431-90912 Chapter 6 Removing and replacing parts 177