HP Pro 4300 C9H70UT C9H70UT#ABA manual Select the Paper Handling

Table 41. Alphabetical printer messages (continued)

Message	Description	Action
TRAY XX	The printer is reporting the current	1. To change the media type,
<TYPE> <SIZE>	configuration of tray XX. The tray	press the SELECT (			)
SIZE SPECIFIED BY USER	switch is in the “custom” position.	button. Use the
		UP ARROW (		) button and
alternates with		the DOWN ARROW (			)
		button to scroll to the type,
TRAY XX		and then press the
<TYPE> <SIZE>		SELECT	button to select it.
TO CHANGE TYPE		2. To change the media size to
PRESS		Letter, A4, Executive, B5 JIS,
		A5, or Legal, set the tray
		switch to the “standard”
		position and adjust the media
		guides to the correct
		positions.
		3. To change the media size to
		other sizes, leave the tray
		switch in the “custom”
		position, adjust the media
		guides against the media,
		and close the tray.
		4. Select the Paper Handling
		menu from the control panel.
		Configure the size and media
		type for the tray.
UNABLE TO STORE JOB	A job cannot be stored because of	1. Install additional memory in
<JOBNAME>	a memory, disk, or configuration	the printer, or install a disk
	problem.	drive in the printer. See
		“Firmware DIMM” on
		page 160.
		2. If a disk drive is installed,
		delete the previously stored
		print jobs to increase the disk
		storage space.
		3. If this error persists, check
		the printer driver and
		application program settings.
USE INSTEAD?	The printer is offering the closest	To choose the alternative, press
TRAY X: <TYPE>	selection of alternative media to	the SELECT (	) button. Use the
<SIZE>	use for the print job.	UP ARROW (	) button and
		the DOWN ARROW (		) button to
		scroll to any alternative selection,
		and then press the SELECT ( )
		button to select it.

Q2431-90912 Chapter 7 Troubleshooting 273