HP Pro 4300 C9H70UT C9H70UT#ABA manual Control-panel assembly 4

CAUTION	The product contains components that are sensitive to electrostatic discharge (ESD). Always
	perform service work at an ESD-protected workstation.

6.Use your fingers to gently pry the front of the print-cartridge door away from the control- panel display to release the retainer clip (callout 6). Unplug the control-panel wire-harness (callout 7). Remove the control panel.

7

6

Figure 97. Control-panel assembly (4 of 4)

Reinstall note When the control-panel display is installed, verify that the wire-harness is placed in the cable guide under the grounding strip.

Q2431-90912 Chapter 6 Removing and replacing parts 159