HP Pro 4300 C9H70UT C9H70UT#ABA manual sheet feeder lifter-drive assembly 1

1,500-sheet feeder lifter-drive assembly

1.Remove the following assemblies:

●Door. See “1,500-sheet feeder door” on page 215.

●Rear and right-side covers. See “1,500-sheet feeder rear cover” on page 217 and “1,500-sheet feeder right-side cover” on page 218.

2.Unplug the lifter-drive harness connector from the PCA (location J1003; callout 1).

3.Unplug the lifter-drive sensor harness from the sensor (callout 2) and remove the sensor harness from the wire clip (callout 3).

3

1

2

Figure 194. 1,500-sheet feeder lifter-drive assembly (1 of 4)

222 Removing and replacing parts Q2431-90912