HP Pro 4300 C9H70UT C9H70UT#ABA manual Initialize Nvram on, Initialize the hard disk on

Table 42. Numerical printer messages (continued)

Message	Description		Action
68.X	A nonvolatile storage device is		1.	Press the SELECT (	) button
PERMANENT STORAGE FULL	full. Pressing the SELECT ( )			to continue.
For help press	button should clear the message.		2.	For 68.0 errors, turn the
	Printing can continue, but behave			printer off and then on.
alternates with	unexpected in response to the		3.	If a 68.0 error persists,
	changed settings.			Initialize NVRAM. See the
68.X				caution and note in “To
PERMANENT STORAGE FULL	X Description			initialize NVRAM” on
To continue press	0 onboard NVRAM			page 251.
	1	flash DIMM or hard drive	4.	For 68.1 errors, use the
				HP Web Jetadmin software to
				delete files from the disk
				drive.
			5.	If this error message persists,
				replace the formatter
				assembly. See “Formatter
				assembly” on page 161.
			6.	If the 68.1 error persists,
				reinitialize the hard disk. See
				the caution and note in “To
				initialize the hard disk” on
				page 252.
			7.	If the 68.1 error persists,
				replace the disk.
68.X	A nonvolatile storage device is		1.	Press the SELECT (	) button
PERMANENT STORAGE WRITE FAIL	failing to write. Pressing the			to continue.
To continue press	SELECT ( ) button should clear		2.	Turn the printer off and then
	the message. Printing can			back on.
	continue, but behave unexpected		3.	If the 68.0 error persists,
	in response to the changed			initialize the NVRAM. See the
	settings.			caution and note in “To
				initialize NVRAM” on
	X Description			page 251.
	0	onboard NVRAM	4.	If this error message persists,
	1	removable disk (flash or hard)		replace the formatter
				assembly. See “Formatter
				assembly” on page 161.
			5.	For a 68.1 error message
				reinitialize the hard disk. See
				the caution and note in “To
				initialize the hard disk” on
				page 252.
			6.	If the 68.1 error persists,
				replace the disk.
69.X	The optional duplexer is not		1.	Remove the duplexer.
PRINTER ERROR	functioning.		2.	Turn the printer off and then
To continue turn off then on				on.
			3.	Replace the duplexer.
			4.	If the message persists,
				replace the duplexer.

Q2431-90912 Chapter 7 Troubleshooting 293