HP Pro 4300 C9H70UT C9H70UT#ABA manual DC controller PCA 2

3.Remove the two screws (callout 4) that fasten the formatter connector bracket to the chassis. Unweave the formatter connector wire-harness from the wire guides (callout 5).

Hint	It might be necessary to remove additional wire-harnesses from the wire guide to gain access to
	the formatter connector harness.

4

5

Figure 129. DC controller PCA (2 of 3)

4.Push in on the locking tab (callout 6) on the rear of the DC controller PCA wire guide (callout 6), and then push up on the guide to release it. Remove the DC controller PCA and formatter connector assembly.

6

7

Figure 130. DC controller PCA (3 of 3)

182 Removing and replacing parts Q2431-90912