HP Pro 4300 C9H70UT C9H70UT#ABA manual Tray 1 separation pad

Tray 1 separation pad

Note		If the optional envelope feeder accessory is installed, press the release button that is on the left
		side and remove it. Then proceed to step 2.
	1.		Remove the front accessory cover (not shown). See “Accessory covers and the tray 2
			extension door” on page 143.
	2.		Insert the tip of a a small flat-blade screwdriver under the tray 1 separation pad.
	3.		Carefully twist the screwdriver to dislodge the separation pad. Remove the tray 1 separation
			pad.

Figure 64. Tray 1 separation pad

140 Removing and replacing parts Q2431-90912