HP Pro 4300 C9H70UT C9H70UT#ABA manual Tray 1 paper-pickup assembly, Tray 1 pickup assembly 1

Tray 1 paper-pickup assembly

1.Remove the following assemblies:

●Top, right-side, and left-side covers. See “Top cover” on page 146 through “Left-side cover” on page 151.

●Tray 1. See “Tray 1” on page 152.

2.Unplug the tray 1 pickup solenoid connector and the top-cover sensor from the

DC controller PCA (locations J79 and J95; callout 1). Unweave the harnesses from the wire guide (callout 2).

Hint	It might be necessary to remove additional wire-harnesses from the wire guide to gain access to
	the solenoid and sensor harnesses.

2

1

Figure 146. Tray 1 pickup assembly (1 of 4)

192 Removing and replacing parts Q2431-90912