HOW to Adjust the Reed Switch

If the console does not display correct feedback, the reed switch should be adjusted. In order to adjust the reed switch, the Left Side Shield (12) must be remov- ed. Remove the four Side Shield Screws (15) from the

Right Side Shield (13) and the three M4 x 16mm Tapping Screws (30) from the bottom of the Left Side Shield. Carefully slide the Left Side Shield forward off the arm of the Crank (20) and remove it.

Next, locate the Reed Switch (33).

Turn the crank until the Magnet (46) is aligned with the

Reed Switch. Loosen but do not remove the M4 x

16ram Screw (30). Slide the Reed Switch slightly clos-

er to or away from the Magnet. Retighten the Screw. Tumthe crank for a moment. Repeat until the console displays correct feedback. When the Reed Switch is correctly adjusted, reattach the left side shield.

HOW TO ADJUST THE RESISTANCE STRAP

If there is not enough pedaling resistance when the resistance knob is turned to the highest setting, the Resistance Strap (17) may need to be adjusted.

To adjust the Resistance Strap, first turn the resis-

tance knob to the low-

est setting.

Next, locate

and open

the Strap Buckle (18) on the underside of the side shields.

Grip the

end of the Resistance Strap (17) and pull it back slightly to remove any slack. While holding the end of the Resistance Strap, fully close the Strap Buckle. Tum the crank for a moment to make sure that there is not too much resistance.

HOW TO ADJUST THE DRIVE BELT

The exercise cycle features a drive belt that must be kept properly adjusted. If the belt causes excessive noise or slips as you pedal, the belt should be checked. To do this, the side shields must first be removed. Refer to the instructions on this page and remove the left side shield. Next, remove the right side shield the same way.

Press down on

the center of the23 Drive Belt (23)

between the front

and rear pulleys,

There should be from 1/4" to 1/2"

of movement in the center of the

Belt.

If the drive belt is

properly adjust-

ed, reattach the side shields. If the Belt needs to be adjusted, loosen the Axle Nut (29) on each side of the fly- wheel. To tighten the Belt, turn the Adjustment Nuts

(27)clockwise; to loosen the Belt, turn the Adjustment Nuts counterclockwise. Make sure that the Flywheel is straight and tighten the Axle Nuts (29). Reattach the side shields.

831.28822 specifications

The Sears 831.28822 is a notable treadmill that has captured the attention of fitness enthusiasts looking for a reliable and efficient exercise machine. This model, designed for both home and light commercial use, features a robust set of characteristics that make it an excellent choice for users at various fitness levels.

One of the standout features of the Sears 831.28822 is its sturdy construction. The treadmill is built to handle frequent use, boasting a weight capacity that accommodates a wide range of users. The spacious running surface ensures comfort during workouts, allowing runners to maintain a natural stride without feeling restricted.

A significant technological aspect of this treadmill is its motor. The Sears 831.28822 is equipped with a powerful yet quiet motor, delivering a smooth running experience. This ensures that users can maintain their workout routines without the distraction of excessive noise, an important factor whether exercising early in the morning or late at night.

For added versatility, the treadmill includes multiple preset workout programs that cater to various fitness goals. These programs are designed to challenge users while also providing guided training regimens, making it suitable for both beginners and more experienced athletes. Additionally, the adjustable incline feature allows users to simulate hill workouts, enhancing calorie burn and cardiovascular endurance.

The console of the Sears 831.28822 is user-friendly, featuring an easy-to-read display that shows essential workout metrics such as speed, distance, time, and calories burned. Some models may include heart rate monitoring features, which provide valuable feedback during workouts. This integration allows users to keep track of their progress and adjust their exercise intensity accordingly.

Safety is also a key consideration in the design of the Sears 831.28822. The treadmill is equipped with an emergency stop feature, providing peace of mind for users, especially those who engage in high-intensity workouts.

In summary, the Sears 831.28822 treadmill combines durability, advanced technology, and user-friendly features, making it a popular choice for those looking to enhance their fitness journey. Its powerful motor, diverse workout programs, and safety features contribute to a satisfying exercise experience, ensuring users can effectively work towards their fitness goals.