Note: The console
can display speed | c=l TIM E | _:_ SEGMENT TIME |
| ||
and distance in |
| |
|
| |
either miles or kilo- |
|
|
meters. To find | _PACE | _= DISTANCE |
|
| |
which unit of mea- |
|
|
surement is select- |
|
|
ed, you must select the console'suser mode. Hold down the Program Select button for aboutthree seconds. The letter =E"for Englishmiles or the let- ter "M" for metric kilometerswill appear in the left display.To change the unit of measurement, press the + button.
While the user |
|
|
mode is selected, |
|
|
press the Program | I | ii- |
Start button. The | ||
left display will |
|
|
then show the total |
| pACE |
number of hours
that the exemise cycle has been used. Press the Program Start button again. The left display will then show the total number of miles pedaled. To exit the user mode, press the Program Select but- ton again.
place your hands on the contacts; your palms must be resting on the contacts closest to you, and your fingers must be touching the other con- tacts. Avoid moving your hands.
When your pulse is detected, the Heart
Rate indicator
above the right dis-
play will begin to flash, one or two
dashes (-
appear in the right display, and then your heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds. Note: If your heart rate is not shown, make sure that your hands are positioned as described. Be careful not to move your hands excessively or to squeeze the metal contacts too tightly.
When you hold the pulse sensor, the dght display will show your heart rate for about 30 seconds. If you continue to hold the pulse sensor, the display will show your heart rate along with the other modes.
OMeasure your heart rate if desired,
Note: If you hold the handgrip pulse sensor and wear the optional chest pulse sensor at the same time, the console may not display your heart rate accurately,
If there are
thin sheets ofContacts plastic on the
metal con- tacts on the
handgrip pulse sensor,
peel off the plastic. To
measure your heart rate,
r_Tum on the fan if desired.
To turn on the fan at low speed, press the Fan button. Pivot the fan to the desired angle. To turn on the fan at high speed, press the Fan button a
second time. To turn off the fan, press the Fan button a third time.
BWhen you are finished exercising, the console will automatically turn off.
If the pedals are not moved for about one minute,
the console displays will darken. If the pedals are not moved for about five minutes, the console will
turn off and the displays will be reset.
11