Weslo 831.2831 user manual HOW to Adjust the Reed Switch

Page 11

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback, the reed switch should be adjusted. In order to adjustthe reed switch,the left side shield must be removed (see

HOW TO ADJUST THE RESISTANCE STRAP on page 10).

With the left side shield removed, locate the Reed Switch (43). Turn the Crank (21) until the Magnet (38) is aligned with the Reed Switch. Loosen, but do not remove, the M4 x 16ram Screw (49). Slide the Reed Switch slightlycloser to or away from the Magnet. Retighten the Screw. Turn the Crank for a moment.

Repeat until the console displays correct feedback. When the Reed Switch is correctly adjusted, reattach the left side shield and the left pedal.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents SEARS, Roebuck and CO Hoffman ESTATES, IL Table of Contents Right Side Before YOU BeginRear Assembly Page 1iI Hcies HOW to Adjust the Pedaling Resistance HOW to Operate the Exercise Cycle HOW to Adjust the Seat Post HOW to Operate the Console FeaturesoftheconsoleHOW to Adjust the Resistance Strap Maintenance and TroubleshootingHOW to Adjust the Reed Switch Workout Guidelines HOW to Measure Your Heart RateConditioning Guidelines Exercise IntensitySuggested Stretches Exercise FrequencyExploded DRAWING---Model R070z Exploded DRAWING--Model No RoTo SEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL Full 90 DAY Warranty
Top Page Image Contents