8.Turn the indicatedAdjustmentKnob (9) counterclock- wise and remove it. Insert the Seat Post (5) into the
Frame (1), Align one of the adjustment holes in the Seat Post with the indicated hole in the Frame. Insert
the Adjustment Knob into the Frame and the Seat Post, and turn the Knob clockwiseuntil it is tight. Make sure that the Knob is inserted through one of the adjustment holes in the Seat Post.
9.Identify the Left Pedal (24). which is marked with an
"L." Using an adjustablewrench, firmly tighten the
Left Pedal counterclockwiseinto the left arm of the Crank (21). Tighten the Right Pedal (not shown) clock- wise into the right arm of the Crank. Important: Tighten both Pedals as firmly as possible. After using the exercise cycle for one weak. retlghten the
Pedals. For best performance, the Pedals must be kept tightened.
/ / | Hcies |
g
10.Make sure that all parts are properly tightened before you use the exercise cycle. Note:Alter assemblyis completed,some extra parts may be left over. Place a mat beneath the exercise cycleto protectthe floor.
7