Weslo 831.2831 user manual Assembly

Page 4

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing matedals untilassembly is completed.

Assembly requires the included tools and your own adjustable wrench _,

Phillips screw-

driver (_3_-,

and pliers _.

 

Use the part drawings below to identifythe small parts used in assembly.The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers to the quantity needed for assembly. Note: Some small parts may have been pre-attached for shipping. If a part is not in the parts bag, check to see if it has been pre-attached,

M8 Split

M8 Nylon

M10 Nylon

Washer (42)-10

Locknut (10)-4

Locknut (33)-4

M4 x 16mm

M8 x 15mm Button

MIO x 65mm Carriage Bolt (30)-4

Screw (49)-4

Screw (34)-6

 

1. While another person lifts the front of the Frame (1)

 

slightly,attach a Stabilizer (2) with two M1O x 65mm

3O

Carriage Bolts (30) and two M10 Nylon Locknuts(33).

 

2

2. While another person lifts the rear of the Frame (1)

slightly,attach a Stabilizer (2) with two M10 x 65mm33

Carriage Bolts (30) and two M10 Nylon Locknuts (33).

2

33

30

4

Image 4
Contents SEARS, Roebuck and CO Hoffman ESTATES, IL Table of Contents Rear Before YOU BeginRight Side Assembly Page 1iI Hcies HOW to Adjust the Seat Post HOW to Operate the Exercise CycleHOW to Adjust the Pedaling Resistance Featuresoftheconsole HOW to Operate the ConsoleMaintenance and Troubleshooting HOW to Adjust the Resistance StrapHOW to Adjust the Reed Switch HOW to Measure Your Heart Rate Conditioning GuidelinesExercise Intensity Workout GuidelinesExercise Frequency Suggested StretchesExploded DRAWING---Model R070z Exploded DRAWING--Model No RoTo Full 90 DAY Warranty SEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL