3. The Console (16) requires three AA batteries; alkaline | 3 |
batteries are recommended. Insert three batteries into the battery compartment. Make sure that the batter- Ies are oriented as shown by the markings inside the battery compartment.
Battedes_
16
t
J
4. Hold the Console (16) near the Handlebar (15). Insert | 4 | |
the console wire intothe indicatedhole in the | ||
| ||
Handlebar. Note: The console wire is longerthan |
| |
shown. |
| |
Attach the Console (16) to the Handlebar (15) with four |
| |
M4 x 16mm Screws (49). Be careful to avoid pinch- |
| |
Ing the console wire. |
|
5.While another person holds the Handlebar (15) near the Upright (13), insert the console wire down through the UprighLAttach the Handlebar to the Upright with three M8 x 15ram ButtonScrews (34) and three M8 Split Washers (42). Be careful to avoid pinching the console wire. Note: The console wire is longer than shown.
16
Wire
Be careful to
avoid pinching the console wire.
Be careful to avoid
pinching the
console wire.