Bushnell 119628C instruction manual See Using, Coordinate, Input Screen, Next

Parameter	Settings	Description
	(Bold=default)
Field Scan	On, Off	Turns Field Scan (Time Lapse) record-
	(After On is	ing mode on/off. When activated,
	selected): “A”	Field Scan forces the camera to take
	Start/Stop, “B”	photos or videos even when it is not
	Start/Stop,	triggered by a nearby live animal,
	Interval	useful for constant monitoring of an
		area that might be far away from the
		camera. The user can set the start
		and stop times for up to two indepen-
		dent “blocks” of Field Scan recording,
		as well as the interval time between
		each photo/video. To ensure correct
		operation, avoid setting overlapping
		start/stop times for Field Scan A and
		B. Please read the “Field Scan 2x…”
		section of this manual for details on
		using this feature.
Coordinate	Off, On	Allows the user to input latitude
Input		and longitude coordinates for the
	See "Using	camera’s location. This data will
	the Coordinate	be embedded in the files saved on
	Input Screen",	the camera’s SD card (if “On” is
	next page	selected).
Video Sound	On, Off	Select “On” to record audio along
(only affects		with the video when the camera is set
video clips)		to video mode (saved file sizes will be
		slightly larger).
Default Set	Cancel,	Select “Execute” and press OK to
	Execute	restore all parameters to the original
		factory default settings. If the camera
		is behaving oddly and you think you
		may have changed the setting for
		something accidently (but aren’t
		sure which one), this will reset all
		parameters to their most commonly
		used or “generic” settings.

20