Bushnell 119628C instruction manual PIR Sensor LED Flashes/Doesn’t Flash, LCD Screen Issues

Page 31

4.Try to avoid setting the camera up on small trees that are prone to being moved by strong winds.

5.Remove any limbs which are right in front of the camera lens.

PIR Sensor LED Flashes/Doesn’t Flash

1.When the camera is in the “Setup” mode, a special LED on the front of the camera will flash when it senses motion. This is for setup purposes only and will help the user aim the camera.

2.During use, the LED will not flash when the camera takes an image. This is to help keep the camera hidden from game.

LCD Screen Issues

1.LCD screen powers on but no text is present.

a.After moving the switch from “Off” to “Setup” or “On”, make sure that the switch is correctly in position to ensure the proper mode (avoid positions “between” two modes).

b.Do not move the switch directly from “On” to “Setup”-always move the switch all the way down to “Off” first, then back up to “Setup”.

2.LCD screen shows a faint black line after turning from “Setup” to “On”.

a.The LCD will turn off when you slide the switch to the “On” position. In some cases, this black line will appear and then

fade in about 1 second. This is normal and the camera will function properly.

3.Screen comes on but then powers off

a.Make sure that you have installed the SD card correctly.

Camera won’t retain settings

Make sure that you have been saving the changes to any parameter settings that you made while in Setup mode, by pressing “OK” after changing the setting. If you don’t save your new setting after changing it, the camera will continue to use the original default setting for that parameter.

31

Image 31

Contents S T R U C T I O N M a N U a L Important Note About the Trophy Cam IntroductionApplications Back View Parts and ControlsFront View Using an External Power Source optional, user provided Installing the Batteries and SD CardLoading Batteries Inserting the SD Card On Mode Using the Trophy CAMOFF, ON, and Setup Modes OFF ModeSetup Mode Shortcut Keys/Functions Setup ModeSetup Information Screen Camera Still Photo Mode Changing Parameter Settings in Setup Mode Using the Setup Menu to Change SettingsParameter Display Press OK to confirm and execute the new settingEXAMPLES-Changing the Settings of Some Common Parameters Field Scan 2x with Live Trigger Feature Page Scan a press OK Select FieldStart times Select Field Set Field Bold=default Setup Menu Parameters and Settings DescriptionInterval Parameter Settings DescriptionTime Stamp Next See UsingCoordinate Input ScreenLo W000,0000 Using the Coordinate Input ScreenMounting Mounting and Positioning the Trophy CAMSensing Angle and Distance Test Switching on the CameraReviewing Images Directly From the SD Card Playing BACK/DELETING the PHOTOS/ VideosReviewing Images on an External Video Monitor Deleting Photos or Videos Reviewing Images by Connecting the Camera to a ComputerPage Downloading the PHOTOS/VIDEOS Camera stops taking images or won’t take images Troubleshooting / FAQBattery life is shorter than expected Camera takes continuous images of no subjectStill Photo and/or Video Quality Problems Camera won’t power upNight photos or videos appear too dark Photos Do Not Capture Subject of Interest Date/Time Stamp not appearing on imagesScreen comes on but then powers off LCD Screen IssuesCamera won’t retain settings LCD screen powers on but no text is presentField Scan Time Lapse not working properly Moisture or Ants Inside CameraTechnical Specifications ONE Year Limited Warranty FCC Compliance Statement Bushnell Outdoor Products