Bushnell 119628C instruction manual Technical Specifications

Page 33

TECHNICAL SPECIFICATIONS

	Image Sensor	5 Megapixel Color CMOS

	Maximum Pixel Size	2848x2136 (6 MP)

	Lens	F = 3.1; FOV=50°; Auto IR-Cut-Remove (at night)

	IR-Flash Range	36’-45’ (12m-15m)

	Display Screen	Std B&W Display: 24x32mm(1.5”)

	Memory Card	SD or SDHC Card, Maximum capacity 32GB

	Internal RAM	32MB

	Picture Size	8MP = 3264x2448; 5MP = 2592x1944; 3MP =
	Picture Size	2048x1536
		2048x1536

	Video Size	720x480/30 fps, 640x480/30fps, 320x240/30fps

	PIR sensitivity	PIR with 3 sensitivity levels: High/Normal/Low

	Operation	Day/Night

	Response Time	0.8 sec

	Triggering Interval	1sec. - 60min. programmable

	Shooting Numbers	1— 3 programmable

	Video Length	5-60sec. programmable

	Power Supply	8xAA recommended, 4xAA as emergency power

	Stand-by Current	< 0.3mA (<7mAh/day)

	Power Consumption	200mA (+530mA when IR-LED lighted)

	User Interface	LCD display

	Interface	TV out (NTSC/PAL); USB; SD card holder; 6V DC
	Interface	external
		external

	Security	Strap; ¼-20 attachment

	Operating	-20 - 60°C (Storage temperature: -30 - 70°C)
	Temperature	-20 - 60°C (Storage temperature: -30 - 70°C)
	Temperature
	Operating Humidity	5% - 90%

	Security	FCC/CE/RoHs/WEEE
	authentication	FCC/CE/RoHs/WEEE
	authentication

33

Image 33

Contents S T R U C T I O N M a N U a L Important Note Introduction About the Trophy CamApplications Back View Parts and ControlsFront View Installing the Batteries and SD Card Using an External Power Source optional, user providedLoading Batteries Inserting the SD Card OFF, ON, and Setup Modes Using the Trophy CAMOFF Mode On ModeSetup Mode Shortcut Keys/Functions Setup ModeSetup Information Screen Camera Still Photo Mode Changing Parameter Settings in Setup Mode Using the Setup Menu to Change SettingsParameter Display Press OK to confirm and execute the new settingEXAMPLES-Changing the Settings of Some Common Parameters Field Scan 2x with Live Trigger Feature Page Select Field Scan a press OKStart times Select Field Set Field Bold=default Setup Menu Parameters and Settings DescriptionInterval Parameter Settings DescriptionTime Stamp Coordinate See UsingInput Screen NextLo W000,0000 Using the Coordinate Input ScreenMounting Mounting and Positioning the Trophy CAMSensing Angle and Distance Test Switching on the CameraPlaying BACK/DELETING the PHOTOS/ Videos Reviewing Images Directly From the SD CardReviewing Images on an External Video Monitor Deleting Photos or Videos Reviewing Images by Connecting the Camera to a ComputerPage Downloading the PHOTOS/VIDEOS Battery life is shorter than expected Troubleshooting / FAQCamera takes continuous images of no subject Camera stops taking images or won’t take imagesCamera won’t power up Still Photo and/or Video Quality ProblemsNight photos or videos appear too dark Photos Do Not Capture Subject of Interest Date/Time Stamp not appearing on imagesCamera won’t retain settings LCD Screen IssuesLCD screen powers on but no text is present Screen comes on but then powers offField Scan Time Lapse not working properly Moisture or Ants Inside CameraTechnical Specifications ONE Year Limited Warranty FCC Compliance Statement Bushnell Outdoor Products