Bushnell 119628C instruction manual Setup Mode Shortcut Keys/Functions

Page 9

videos automatically (according to its current parameter settings) when it is triggered by the PIR sensor’s detection of activity in the area it covers.

You can either move the power switch directly from OFF to ON mode, or stop at the SETUP position first to change one or more settings, then move the switch to ON after you have finished doing so.

SETUP Mode

In the SETUP mode you can check and change the settings of the Trophy Cam with the help of its built-in LCD (or a monitor connected to the TV out jack). These settings, found in the SETUP Menu, let you change the photo or video resolution, interval between photos, switch the time imprint on, etc. Moving the power switch to the SETUP position will turn on the LCD display, and you will see an information screen that shows how many images have been taken, the battery level, camera or video mode, etc (see Fig. 3, pg. 10).

NOTE: Always move the power switch from OFF to SETUP mode. It is possible that the camera could lockup if it is switched from ON to SETUP mode. If this occurs, simply move the switch to OFF and then push it up to SETUP again.

SETUP Mode Shortcut Keys/Functions

As mentioned earlier in “Parts & Controls”, four of the keys below the LCD have secondary, “shortcut” functions when the camera is switched to SETUP mode (but the MENU key has not been pressed):

•Press the UP key to quickly set the camera to shoot video clips.

•Press the DOWN key to quickly set the camera to take still photos.

•Press the RIGHT key to manually trigger the shutter. This is useful for testing the camera-make sure you are in SETUP mode, press the RIGHT key, and a few seconds later a photo or video (depending on how the camera was set) will be saved to the SD card (or internal memory if no card is inserted). The “number of images taken” counter on the bottom left of the LCD will increase by one. If the display indicates “SD PROTECTED” when you press the SHOT key, switch the camera OFF, remove the SD card and slide its protect switch off.

•Press the OK key to replay (review or playback) photos/videos on a connected TV monitor. See “Playing Back Photos/Videos” for more details.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents S T R U C T I O N M a N U a L Important Note Introduction About the Trophy CamApplications Back View Parts and ControlsFront View Installing the Batteries and SD Card Using an External Power Source optional, user providedLoading Batteries Inserting the SD Card OFF, ON, and Setup Modes Using the Trophy CAMOFF Mode On ModeSetup Mode Shortcut Keys/Functions Setup ModeSetup Information Screen Camera Still Photo Mode Changing Parameter Settings in Setup Mode Using the Setup Menu to Change SettingsParameter Display Press OK to confirm and execute the new settingEXAMPLES-Changing the Settings of Some Common Parameters Field Scan 2x with Live Trigger Feature Page Select Field Scan a press OKStart times Select Field Set Field Bold=default Setup Menu Parameters and Settings DescriptionInterval Parameter Settings DescriptionTime Stamp Coordinate See UsingInput Screen NextLo W000,0000 Using the Coordinate Input ScreenMounting Mounting and Positioning the Trophy CAMSensing Angle and Distance Test Switching on the CameraPlaying BACK/DELETING the PHOTOS/ Videos Reviewing Images Directly From the SD CardReviewing Images on an External Video Monitor Deleting Photos or Videos Reviewing Images by Connecting the Camera to a ComputerPage Downloading the PHOTOS/VIDEOS Battery life is shorter than expected Troubleshooting / FAQCamera takes continuous images of no subject Camera stops taking images or won’t take imagesCamera won’t power up Still Photo and/or Video Quality ProblemsNight photos or videos appear too dark Photos Do Not Capture Subject of Interest Date/Time Stamp not appearing on imagesCamera won’t retain settings LCD Screen IssuesLCD screen powers on but no text is present Screen comes on but then powers offField Scan Time Lapse not working properly Moisture or Ants Inside CameraTechnical Specifications ONE Year Limited Warranty FCC Compliance Statement Bushnell Outdoor Products
Top Page Image Contents