3. Loosen the Seat Post Knob (27) in the Frame (1) | 3 |
|
|
a few turns. |
|
| |
|
|
| |
Orient the Seat Post (6) as shown. Then, insert |
|
|
|
the Seat Post into the Frame (1). |
| Adjustment | |
Slide the Seat Post (6) upward or downward to |
| 6 | Holes |
|
| ||
the desired position, and tighten the Seat Post |
|
|
|
Knob (27) into an adjustment hole in the Seat |
| 1 | 27 |
Post. |
| ||
|
| ||
Move the Seat Post (6) upward or downward |
|
|
|
slightly to make sure that the Seat Post Knob |
|
|
|
(27) is engaged in one of the adjustment |
|
|
|
holes in the Seat Post. |
|
|
|
4. Orient the Seat (23) and the Seat Carriage (24) | 4 |
|
|
as shown. | 23 |
| |
|
| ||
Attach the Seat (23) to the Seat Carriage (24) |
|
|
|
with four M8 x 16mm Screws (65) and four M8 |
|
|
|
Split Washers (64). |
|
|
|
|
| 24 |
|
|
| 64 |
|
|
| 65 |
|
7