7.While a second person holds the Console (13) near the Upright (4), connect the console wires to the Extension Wire (59) and to the Pulse Wire (61).
Insert the excess wire into the Upright (4) or into the Console (13).
Tip: Avoid pinching the wires. Attach the Console (13) to the Upright (4) with four M4 x 16mm Screws (43).
7
13 | Avoid pinching |
| the wires |
61 59 4
43
43
8.Orient the Upright (4) assembly and the Pivot Cover (12) as shown.
Slide the Pivot Cover (12) upward to the Handlebar (5). Tip: Bend and flex the Pivot
Cover slightly to slide it over the Handlebar.
Attach the Pivot Cover (12) to the Handlebar (5) with four M4 x 22mm Screws (31).
8
5
31
12 | 31 |
4
9