JVC CA-MXS6MD Tuning in a Preset Station, On the unit Push the joy control rightward or leftward

3 Repeat steps 1 and 2 to store stations of the other band.

When you cannot store stations you want automatically

Stations with weak signals cannot be detected with this automatic presetting method. To store such a station, use the manual presetting method that follows.

To preset stations manually — Manual Presetting 1 Tune in the station you want to preset.

• See “Tuning in a Station” on page 18.

2 Press SET.

The preset number starts flashing.

3 Select a preset number.

On the remote control:

Press the number buttons.

Ex. For preset number 5, press 5.

For preset number 15, press +10, then 5. For preset number 20, press +10, then 10.

On the unit:

Push the joy control rightward ( ) or leftward ( ).

•Rightward ( ): to increase the preset numbers.

•Leftward (): to decrease the preset numbers.

4 Press SET again.

The tuned station in step 1 is stored in the preset number selected in step 3.

•Storing a new station on a used number erases the previously stored one.

When you unplug the AC power cord or if a power failure occurs

The preset stations will be erased in a few days. If this happens, preset the stations again.

Tuning in a Preset Station

1 Press FM/AM.

The unit automatically turns on and tunes in the previously tuned station (either FM or AM).

•Each time you press the button, the band alternates between FM and AM.

2 Select a preset number.

On the remote control:

Press the number buttons.

Ex. For preset number 5, press 5.

For preset number 15, press +10, then 5. For preset number 20, press +10, then 10.

On the unit:

Push the joy control rightward ( ) or leftward ( ).

•Rightward ( ): to increase the preset numbers.

•Leftward (): to decrease the preset numbers.

– 19 –