JVC CA-MXS6MD manual ALL Erase Function, Repeat and 5 to select all the tracks you want to erase

Page 47

5 Press SET.

“ ” appears between track number and track title.

“ ” means the track in the same line will be erased when you finish the editing procedure.

Ex. When you want to erase track 3

•If you have selected a wrong track number, press CANCEL, then select the correct track number.

6 Repeat step 4 and 5 to select all the tracks you want to erase.

• You can select up to 15 tracks.

7 Press ENTER/DEMO to finish selecting tracks.

8 Press ENTER/DEMO again to finish the editing procedure.

“EDITING” appears for a while, then “WRITING” flashes while the editing you have made is being recorded on the MD.

ALL ERASE Function

This function allows you to erase all the tracks on an MD.

•To stop any time during editing process, press TITLE/ EDIT.

1 Insert an MD you want to edit into the MD loading slot.

•It takes about 5 seconds for the unit to read the TOC (Table Of Contents) of the inserted MD. While the unit is reading it, you cannot go to the next step.

2 Press TITLE/EDIT.

The source is changed to “MD.”

3 Push the joy control downward ( ) to select “ALL ERASE” (highlighted), then press SET.

4 Press ENTER/DEMO to finish the editing procedure.

“EDITING” appears for a while, then “WRITING” flashes while the editing you have made is being recorded on the MD.

– 44 –

Page 46 Page 48
Image 47
Page 46 Page 48
Contents CA-MXS6MD Class Laser Product Front View Introduction PrecautionsContents Become familiar with the buttons and controls on your unit Location of the Buttons and ControlsMain unit Display Window0CD1, 0CD2, 0CD3 open/close buttons Main UnitSee pages in the parentheses for details MD # / 8 play/pause button 11Remote Control Remote ControlUnpacking Adjusting the Voltage SelectorConnecting Antennas Getting StartedTo connect an outdoor AM antenna Connecting SpeakersYou can connect the speakers using the speaker cords AM antennaTo connect another component such as a cassette deck Connecting Other EquipmentTo connect a portable MD player with a mini output jack To start the display demonstration manually Putting the Batteries into the Remote ControlDuring MD editing and title entry mode Main unit Basic and Common OperationsTo select the tuner as the source, press FM/AM Turning On the PowerTo switch off the power supply completely, unplug To turn off the unit on standby, press again so thatSelecting the Display Brightness Adjusting the VolumeTo turn down the volume level temporarily Reinforcing the Bass SoundChanging the Main Display Screen How these settings workSnail Selecting the Animation CharactersTo select the animation character or level meter, press Penguin Tortoise Dolphin Elephant RabbitSurround modes To store the display setting in memoryManual mode Selecting the Sound ModesTo use your own sound mode Creating Your Own Sound Mode Manual ModeListening to FM and AM Broadcasts Presetting Stations Setting the AM Tuner Interval SpacingTuning in a Station Press SET again Tuning in a Preset StationRepeat steps 1 and 2 to store stations of the other band On the unit Push the joy control rightward or leftwardMenu Playing Back CDsRepeat steps 1 to 3 to place other CDs Loading CDsPlaying Back the Entire Discs Continuous Play Load CDsTo stop playback for a moment Basic CD OperationsPrograming the Playing Order of the Tracks Program Play To exchange CDs during playback of anotherTo modify the program To check the program contentsTracks of all loaded CDs will play at random Select Random play mode using the menu. See also Press MenuRandom play also stops when you open a disc tray Playing at Random Random PlayOn the unit only To prohibit disc ejection To cancel the prohibition and unlock the discs, repeatRepeating Tracks or CDs Repeat Play Prohibiting Disc Ejection Disc LockPlaying Back an MD Press MD 3 Basic MD OperationsTo locate a particular point in a track during play Press the number buttons to select the tracks On the remote control Load an MDIf the total playing time exceed 2 hours and 30 minutes Repeat steps 1 and 2 to program other tracks Press MD #Tracks of the loaded MD will play at random To prohibit disc ejection Disc Lock Repeating Tracks Repeat PlayRecording on MDs To put a track mark manually while recording an Before You Start RecordingAbout the track marks To avoid erasing important recordingsTo check the remaining recording time To make a recording using this feature, followPrecautions for performing long-hour stereo recording Stereo Long-Hour RecordingAbout High-Speed Recording Press Long Mode on the unit if necessaryRecording length mode changes as follows Recording Any Sound Source Standard RecordingInsert a recordable MD into the MD loading slot Prepare CDs Using the HIGH-SPEED CD 3MD button on the unitRecording CDs CD Synchronized Recording All CDs Synchronized RecordingOne CD Synchronized Recording During One CD Synchronized Recording First Track RecordingPrepare a CD Press Disc to select the disc you want to recordIf Sound Synchronized Recording do not work correctly When recording is stopped or finishedStart playback on the external equipment During First Track RecordingDemo Editing MDsIntroducing MD Editing Functions Divide Function To divide the joined tracks, see the Divide function Press ENTER/DEMO to finish the editing procedureJoin Function Move FunctionInsert an MD you want to edit into the MD loading Erase FunctionPush the joy control downward or upward To select the track you want to moveYou can select up to 15 tracks ALL Erase FunctionRepeat and 5 to select all the tracks you want to erase Making Your Own Titles and Screens About the number of characters inputted for an MD Title entry mode changes as followsPress SET to enter the selected title entry mode Assigning Titles to an MDPress ENTER/DEMO to finish the current title entry Ex. When entering HInput a character Repeat steps 6 and 7 to enter other charactersPress MD Title Press ¿10 or fl+10 to change the title entry modeChanging the Title To erase all the charactersPress Character to select the character set you Want Title entryWriting flashes while the editing you have Made is being recorded on the MDOn the unit only Press to turn off the unit if it is on Call up the Startup Display setting mode Press MenuCreating Your Own Opening and Ending Screens To erase your own screenUsing the Timers How Recording Timer actually works Setting the ClockTo adjust the clock again Using Recording TimerSource changes as follows Timer and REC indicators start flashing on the displayItems on the menu change as follows Press to turn off the unit on standby if necessary Using Daily TimerTo turn on or off Recording Timer after its setting is done How Daily Timer actually worksAbove step, select a disc number and a track Call up the Daily Timer Setup screenTo select Daily SET UP To set the hour of the timer-off time, then press SETIf the unit is kept turned on when the timer-on time comes To turn on or off Daily Timer after its setting is doneTimer and Daily indicators stop flashing and remains lit How Sleep Timer actually works Using Sleep TimerTimer Priority Using the Other Convenient Functions Buttons you use to operate the menu About the menu screenReinforcing the Bass Sound Sound SettingSelecting the sound modes Selecting the playback modes FM Reception Mode SettingCD and MD Playback Mode Setting Setting the repeat modesCreating your own display colors Display SettingSelecting the animation character Selecting the display colorSelecting the display pattern External Source SettingAdjusting the display contrast Press SET to finish the adjustmentChanging the source name Auto Power Off SettingCurrent setting will appear following A.P.off Handling CDs MaintenanceTo clean the CD General NotesAtrac Adaptive TRansform Acoustic Coding/ATRAC3 Utoc User Table Of ContentsAdditional Information MD Disc TypesHcms High-speed Copy Management System Scms Serial Copy Management SystemSignification MD MessagesSymptom TroubleshootingSpecifications Voltage Selector

CA-MXS6MD specifications

The JVC CA-MXS6MD is a versatile and compact stereo system designed to deliver rich sound quality and a range of multimedia playback options for music enthusiasts. Known for its stylish design and user-friendly features, this system is ideal for both casual listeners and serious audiophiles.

One of the standout features of the CA-MXS6MD is its integrated Minidisc player/recorder, allowing users to enjoy high-quality audio playback and the flexibility to record their favorite tunes directly from the radio or other sources. This capability highlights an era when Minidiscs were popular, providing a nostalgic touch for those who appreciate vintage audio formats.

The CA-MXS6MD also includes a CD player that supports CD-R/RW playback, enabling users to listen to their personalized compilations without any hassle. The system features an FM/AM tuner, complete with 30 presets, making it easy for users to switch between their favorite radio stations.

Connectivity is a strongpoint of the JVC CA-MXS6MD. It includes a front auxiliary input and a headphone jack, making it convenient to connect various devices such as smartphones or tablets. The presence of a USB input allows for playback of MP3 and WMA files, offering further versatility in music choices.

In terms of sound performance, the CA-MXS6MD is equipped with powerful speakers that produce clear and dynamic audio. The built-in amplifier ensures that the sound output is robust while maintaining clarity across various genres of music. The system also features a variety of sound modes, allowing users to tailor their listening experience according to their preferences.

Notably, the system includes a remote control for added convenience, enabling users to adjust settings from a distance. The easy-to-navigate interface and clear display make it user-friendly, even for those not as tech-savvy.

Overall, the JVC CA-MXS6MD synthesizes nostalgia with modern convenience, providing a rich audio experience through its multi-format playback capabilities and robust sound performance, making it a cherished choice for music lovers.
Top Page Image Contents