JVC CA-MXS6MD manual One CD Synchronized Recording

Continued

To record a single track during play or pause

Press HIGH-SPEED CD 3MD while playing back or pausing a CD track you want to record.

The playback of that CD track is stopped, and the same track starts playing from the beginning again. This time, the MD recorder starts recording the CD track.

•When the track is recorded, both the CD player and the MD recorder stop.

7Using the REC MODE button on the unit

You can select the recording speed — high speed or normal speed.

1 Insert a recordable MD into the MD loading slot.

2 Prepare CDs.

•After placing CDs, press CD #/ 8, then 7before going to the next step.

•You can make a program (see page 22) or select Random play mode (see page 24) if you want. In this case, you cannot select the starting disc

=go to step 4.

3 Press DISC to select the disc you want to start recording with.

•Make sure that the correct disc number indicator is selected on the display.

4 Press LONG MODE on the unit if necessary.

The recording length mode changes as follows:

SP LP2

(Standard Play) (2 Times Long Play)

LP4

(4 Times Long Play)

•For the recording length mode, see “Stereo Long- Hour Recording (MDLP)” on page 33.

5 Select the recording mode.

1)Press REC MODE.

•Make sure that “CD=MD” is selected (highlighted).

2) Push the joy control rightward ( ) or leftward ( ) if you want to change the recording speed from normal speed to high speed (HIGH).

3)Press SET.

The REC PAUSE lamp on the unit lights, and recording starts.

When all loaded CDs are recorded, recording will stop. Both the CD player and the MD recorder stop automatically.

To stop recording, press 7. “WRITING” flashes for a while.

Both the CD player and the MD recorder stop.

To record a single track during play or pause

1 Press REC MODE while playing back or pausing a CD track you want to record.

2Make sure that “CD =MD” is selected (highlighted).

3	Push the joy control rightward ( ) or leftward ( ) if you
	want to change the recording speed from normal speed to
	high speed (HIGH).
4	Press SET.
	The playback of that CD track is stopped, and the same

track starts playing from the beginning again. This time, the MD recorder starts recording the CD track.

•When the track is recorded, both the CD player and the MD recorder stop.

During All CDs Synchronized Recording

You can exchange the discs not being played back. (See page 22.)

One CD Synchronized Recording

7Using the REC MODE button on the unit ONLY

You can record the entire CD onto an MD.

1 Insert a recordable MD into the MD loading slot.

– 36 –