JVC CA-MXS6MD manual Erase Function, Push the joy control downward or upward, Slot

3 Push the joy control downward ( ) to select “MOVE” (highlighted), then press SET.

8 Press ENTER/DEMO to finish the editing procedure.

“EDITING” appears for a while, then “WRITING” flashes while the editing you have made is being recorded on the MD.

		ERASE Function
4 Push the joy control downward ( ) or upward ( )
		This function allows you to erase unwanted tracks.
	to select the track you want to move.
		• To stop any time during editing process, press TITLE/
			EDIT.
		1 Insert an MD you want to edit into the MD loading
			slot.
			• It takes about 5 seconds for the unit to read the TOC
			(Table Of Contents) of the inserted MD. While the
5
	Press SET.		unit is reading it, you cannot go to the next step.
		2	Press TITLE/EDIT.
			The source is changed to “MD.”

Ex. When you want to move track 3	3
• If you have selected a wrong track number, press		Push the joy control downward ( ) to select
		“ERASE” (highlighted), then press SET.
CANCEL, then select the correct track number.
6 Push the joy control downward ( ) or upward (	)
to select the position where you want to move the
track to.

4 Push the joy control downward (	) or upward (	)
to select the track you want to erase.
Ex. When you want to move to
the track 5 position
7 Press SET.

•If you have selected wrong tracks, press CANCEL, then select the correct tracks by repeating from step

4.

– 43 –