Diamondback 500Ub manual 500Sr Recumbent Assembly Drawing, Handlebar Assembly, Console Assembly

Page 4

500Ub Upright Assembly Instructions (Continued)

cover using a 6mm Allen wrench.

7.Place the bottle holder on the console mast. Insert and tighten the two M5 x 12mm screws using a Phillips screwdriver.

8.Snap the water bottle into the bottle holder.

Step 5: Handlebar Assembly

1. Insert the hand pulse harness through the opening on the left side of the console mast and out the top of the console mast.

2. Set the handlebar in place and secure it using a clamp, an M7 x P1.0 x 30mm bolt with a spring washer and fl at washer on top hole of the clamp and a T-shape Knob with a bushing, a fl at wash- er and spring washer on bottom hole of the clamp. As the bolt and T-shape knob are tightened leave the same gap on top and bottom.

3.Install the handlebar top and bottom covers by attaching them to each other from the opening in the bottom of the bottom cover using two M3 x 14mm Screws and one M5 x 25mm on each side of each cover.

Step 6: Console Assembly

1. Insert the ends of the main wiring harness and hand pulse wiring harness, trough the opening of the rear console cover.

2. Connect both plugs, from the main wiring harness and hand pulse wiring harness, to the plug receptors on the backside of the console taking care to install correctly (see plug alignment marks).

WIRING HARNESS INSTALLATION HINT: Any excess wiring must be carefully inserted (“stored”) back into the console mast before installing the console onto the console mounting plate.

3.Attach the console to the console mounting plate with the four M5 x 10mm screws on the top and bottom holes of the mounting plate using a Phillips screwdriver.

4.Attach the rear console coverl to the back of the console using four M5 x 10mm screws using a Phil- lips screwdriver.

5.Attach the right console plastic mount hood to console mast using one M5 x 14mm bolt and Phil- lips screwdriver. The cover should sit above the plastic handlebar covers and below the mounting brackter for the console

6.Attach the left console plastic mount hood to console mast using one M5 x 14mm bolt then to the right cover using three M3 x 14mm screws and a Phillips screwdriver.

Step 7: Transformer Assembly

1.Plug transformer into plug receptor located on the rear of the unit

2.Plug the transformer into power outlet.

NOTE: Be sure to use the right transformer for your power outlet, 110V or 220V.

8

500Ub.Sr OM R1.indd 8-9

500Sr Recumbent Assembly Drawing

9

6/11/2008 9:54:21 AM

Image 4
Contents Table of Contents Purchasers Reference InformationSafety Instructions and Warnings Introduction500Ub Upright Assembly Drawing 500Ub Upright Assembly Instructions500Sr Recumbent Assembly Drawing Handlebar AssemblyConsole Assembly Transformer Assembly500Sr Recumbent Assembly Instructions BMI = weight lb./ height² in x Workout GuidelinesConsole Operating TipsConsole Layout Main DisplayDisplays Function KeysAudio Workout ProgramsWarm Up Cool DownPause & Reset a program Program Default ValuesWorkout Summary Quick StartClassic Programs Manual RandomYou may press UP or Down keys to adjust the time IntervalHill Climb Custom Trainer Modify ProfileTarget HR HR Interactive ProgramMaintenance Domestic Warranty InformationExclusions Additional RightsIMPORTANT! IMPORTANT! IMPORTANT! Important

500Ub, 500Sr specifications

The Diamondback 500Sr and 500Ub are impressive additions to the world of advanced bicycles, designed for cyclists who demand performance, versatility, and style. These models embody a perfect balance of cutting-edge technology and innovative design, catering to both enthusiasts and everyday riders.

The Diamondback 500Sr features a lightweight aluminum frame that provides durability without sacrificing agility. This frame design not only enhances performance but also allows for improved handling in various terrains. Its sleek geometry ensures that riders experience optimum comfort during both short rides and long-distance journeys.

One of the standout features of the 500Sr is its high-quality suspension system. Equipped with a responsive front fork, it absorbs shocks from rough terrains, making it ideal for mountain trails or bumpy surfaces. The adjustable settings on the suspension allow riders to customize their experience, enhancing both comfort and control based on their riding style.

On the other hand, the Diamondback 500Ub is designed specifically for urban environments. This model emphasizes stability and maneuverability, making it an excellent choice for commuters navigating city streets. The 500Ub features a strong yet lightweight frame, complemented by a comfortable saddle and ergonomic handlebars, promoting an upright riding position that reduces strain during longer rides.

Both models are equipped with advanced braking systems. The 500Sr boasts hydraulic disc brakes, providing precise stopping power in all weather conditions, while the 500Ub features reliable mechanical disc brakes that ensure safety without adding unnecessary weight.

Technology also plays a crucial role in these bicycles. The 500Sr comes with a wide range of gear options, featuring a 1x drivetrain system that simplifies shifting while enhancing reliability. Conversely, the 500Ub is outfitted with a practical gear setup suited for urban navigation, facilitating quick gear changes that accommodate varying terrain and traffic conditions.

In terms of aesthetics, both models showcase stylish designs and appealing color options, making them visually appealing to riders of all ages. The attention to detail in craftsmanship ensures that each bike not only performs well but also looks great on the road.

In conclusion, the Diamondback 500Sr and 500Ub stand as excellent choices for those seeking high-performance bicycles. With their distinctive features, advanced technology, and thoughtful design, these models cater to a range of cycling needs, whether tackling challenging trails or maneuvering through city streets. Riders can expect a reliable and enjoyable cycling experience with either option.