Life Fitness 8973701 REV B-3 owner manual

Page 13

3.7ASSEMBLE MOVING ARMS TO PEDAL ARMS; PEDAL / MOVING ARM JOINT PIVOT COVERS

Parts: Hardware Bag #4 (2, M10 X 74mm Black Hex Head Bolts) (2, M10 Hex Nuts)

(4, M5 X 8mm Black Phillips Screws)

Tools: 17mm Socket Wrench, Phillips Screwdriver

Lift the front end of the user left pedal lever (Q) to meet the left rocker arm clevis (R). Secure the pedal lever to the rocker arm clevis using one M10 X 74mm Hex Head Bolt (S) and one M10 Hex Nut (T). Tighten the bolt and nut secure- ly. Repeat the procedure for the right pedal lever and rocker arm clevis.

Attach the left side lower pivot covers (U) over the moving arm/pedal arm pivot point. Snap the cover together over the moving arm/pedal arm pivot point and use two M5 X 8mm Black Phillips Screws (V) to attach. Repeat for right side.

Note: Left and right covers are identical.

R	Q
	S

Image 13

Contents X3 TOTAL-BODY Elliptical CROSS-TRAINER Page International Offices Corporate HeadquartersPage Table of Contents Page Important Safety Instructions Save These Instructions for Household USE X3 with Go Console X3 TOTAL-BODY Elliptical CROSS-TRAINER OverviewM10 X 74MM Black HEX Head Bolt QTY Wave Packaging Connect Base WiringAssemble the Stabilizer Assemble the Console UprightAssemble the Rocker Arms Page Assemble Front Base Shroud Console Bracket to the Upright Plug cables into the back of the display console Plug in the UnitInitial Setup Main Features Coachzone Overview CoachzoneF E Coachzone Descriptions Pause Armtoner ArmtonerGlutetoner Coachzone Settings TimerResistance Level & Intensity Level Troubleshooting Service & Product MaintenanceProblem HOW to Obtain Product Service Preventative Maintenance TipsAssembled / Working Dimensions SpecificationsWhat is Covered Warranty InformationChanges in Warranty not Authorized