Life Fitness 8973701 REV B-3 Assemble Front Base Shroud Console Bracket to the Upright

Page 14

3.8ASSEMBLE FRONT BASE SHROUD; CONSOLE BRACKET TO THE UPRIGHT

Parts: Hardware Bag #5 (8, M5 X 12mm Black Phillips Head Screws)

(2, M10 X 15mm Silver Hex Head Bolts)

Tools: Phillips Screwdriver, 17mm Socket Wrench

Position the left side base shroud (W) over the metal bracket (X) and screw in with four M5 X 12mm Black Phillips Head Screws (Y). Repeat for the right side base shroud.

Slide the console bracket (Z) into the upright. Use two M10 X 15mm Silver Hex Head Bolts (A1) to attach the console bracket to the upright.

Note: Avoid pinching the console wires.

Y

W

X

Y

Z

A1

12

Image 14

Contents X3 TOTAL-BODY Elliptical CROSS-TRAINER Page Corporate Headquarters International OfficesPage Table of Contents Page Important Safety Instructions Save These Instructions for Household USE X3 TOTAL-BODY Elliptical CROSS-TRAINER Overview X3 with Go ConsoleM10 X 74MM Black HEX Head Bolt QTY Wave Assemble the Stabilizer Connect Base WiringPackaging Assemble the Console UprightAssemble the Rocker Arms Page Assemble Front Base Shroud Console Bracket to the Upright Plug in the Unit Plug cables into the back of the display consoleInitial Setup Main Features F E Coachzone Descriptions CoachzoneCoachzone Overview Armtoner Pause ArmtonerGlutetoner Resistance Level & Intensity Level TimerCoachzone Settings Service & Product Maintenance TroubleshootingProblem Preventative Maintenance Tips HOW to Obtain Product ServiceSpecifications Assembled / Working DimensionsWarranty Information What is CoveredChanges in Warranty not Authorized