Life Fitness 8973701 REV B-3 Preventative Maintenance Tips, HOW to Obtain Product Service

Page 24

7.2PREVENTATIVE MAINTENANCE TIPS

The Life Fitness Total Body Elliptical Cross-Trainer is backed by the engineering excellence and reliability of Life Fitness and is one of the most rugged and trouble-free pieces of exercise equipment on the market today.

Note: Safety of the equipment can be maintained only if the equipment is examined regularly for damage or wear. Keep the equipment out of use until the defective parts are required or replaced. Pay special attention to parts that are subject to wear, as outlined below.

The following preventative maintenance tips will keep the Life Fitness Total Body Elliptical Cross-Trainer operating at Peak performance:

Important: Turn the cross-trainer off and unplug prior to performing any maintenance.

 

Inspect the power cord. If the cord is damaged call technical

Weekly

support. Make sure the cord is positioned in a location where it will

 

not be damaged.

 

Clean the top surface of the pedals.

 

Clean the display console and all exterior surfaces with mild soap,

 

water and a soft cotton cloth or a Life Fitness approved cleaner.

Monthly

Note: Do not use paper towels, ammonia or acid based cleaners

 

on the product. At no time should cleaner be applied directly to any

 

part of the equipment; spray the cleaner on a soft cloth and then

 

wipe the unit.

 

Inspect the exterior parts for wear and check that user assembly

 

bolts are still tight.

Note: Long fingernails may damage or scratch the surface of the console. Use the pad of the finger to press the keys.

LIFE FITNESS APPROVED CLEANERS

Two preferred cleaners have been approved by Life Fitness reliability experts: PureGreen 24 and Gym Wipes. Both cleaners will safely and effectively remove dirt, grime and sweat from equipment. PureGreen 24 and the Antibacterial Force formula of Gym Wipes are both disinfectants that are effective against MRSA and H1N1.

PureGreen 24 is available in a convenient spray. Apply the spray to a microfiber cloth and wipe down the equipment. Use PureGreen 24 on the equipment for at least 2 minutes for general disinfection purposes and at least 10 minutes for fungus and viral control.

Gym Wipes are large, durable pre-moistened wipes to use on the equipment before and after workouts. Use Gym Wipes on the equipment for at least 2 minutes for general disinfection purposes.

Contact Life Fitness Customer Support Services to order these cleaners.

Call 1-800-351-3737 or email: customersupport@lifefitness.com.

LIFE FITNESS COMPATIBLE CLEANERS

Mild soap and water or a mild non-abrasive household cleaner can also be used to clean the display and all exterior sur- faces. Use a soft cotton cloth only. Apply the cleaner to the cotton cloth before cleaning. DO NOT use ammonia or acid based cleaners. DO NOT use abrasive cleaners. DO NOT use paper towels. DO NOT apply cleaners directly to the equipment surfaces.

7.3HOW TO OBTAIN PRODUCT SERVICE

1. Please contact your dealer or Life Fitness Customer Service at 1-800-351-3737.

2. Verify the symptom and review the operating instructions and troubleshooting matrix.

3. Locate and document the serial number of the unit. The serial number plate is located on the main frame, in front of the rear shroud. Please also have proof of purchase information available.

22

Image 24
Contents X3 TOTAL-BODY Elliptical CROSS-TRAINER Page Corporate Headquarters International OfficesPage Table of Contents Page Important Safety Instructions Save These Instructions for Household USE X3 TOTAL-BODY Elliptical CROSS-TRAINER Overview X3 with Go ConsoleM10 X 74MM Black HEX Head Bolt QTY Wave Connect Base Wiring PackagingAssemble the Stabilizer Assemble the Console UprightAssemble the Rocker Arms Page Assemble Front Base Shroud Console Bracket to the Upright Plug in the Unit Plug cables into the back of the display consoleInitial Setup Main Features Coachzone Coachzone OverviewF E Coachzone Descriptions Armtoner Pause ArmtonerGlutetoner Timer Coachzone SettingsResistance Level & Intensity Level Service & Product Maintenance TroubleshootingProblem Preventative Maintenance Tips HOW to Obtain Product ServiceSpecifications Assembled / Working DimensionsWarranty Information What is CoveredChanges in Warranty not Authorized