Life Fitness 8973801 REV B-3 Assemble Front Base Shroud Console Bracket to the Upright

Page 13

3.8ASSEMBLE FRONT BASE SHROUD; CONSOLE BRACKET TO THE UPRIGHT

Parts: Hardware Bag #5 (8, M5 X 12mm Silver Phillips Head Screws)

(2, M10 X 15mm Silver Hex Head Bolts)

Tools: Phillips Screwdriver, 17mm Socket Wrench

Position the left side base shroud (N) over the metal bracket (O) and screw in with four M5 X 12mm Silver Phillips Head Screws (12). Repeat for the right side base shroud.

Slide the console bracket (P) into the upright. Use two M10 X 15mm Silver Hex Head Bolts (13) to attach the console bracket to the upright.

Note: Avoid pinching the console wires.

12

O

12

P

13

12

Image 13

Contents X5 TOTAL-BODY Elliptical CROSS-TRAINER International Offices Corporate HeadquartersPage Table of Contents Page Important Safety Instructions Save These Instructions for Household USE X5 TOTAL-BODY Elliptical CROSS-TRAINER Overview Tools & Hardware AssemblyPackaging Connect Base WiringAssemble the Stabilizers Assemble the Console UprightAssemble the Rocker Arms Moving ARM Pivot Covers Page Assemble Front Base Shroud Console Bracket to the Upright Plug in the Unit ConnectionsInitial Setup Contact Heart Rate Main FeaturesSelectstride Coachzone Overview CoachzoneF E Coachzone Description Rmtoner Glutetoner Coachzone Settings TimerResistance Level & Intensity Level Troubleshooting Service & Product MaintenanceProblem HOW to Obtain Product Service Preventative Maintenance TipsLife Fitness X5 CROSS-TRAINER Specifications SpecificationsWhat is Covered Warranty InformationChanges in Warranty not Authorized