7.Hold the Right Handrail (88) near the Right Upright (72). Insert the Upright Wire (91) through the large hole on the bottom of the Right Handrail. Pull the Upright Wire out of the hole in the side of the Right Handrail.
Set the Right Handrail (88) and the Left Handrail
(87)on the Right and Left Uprights (72, 64). Attach the Crossbar (86) to the Handrails and the Uprights with four 3/8" x 2 1/4" Patch Bolts
(2)and four 3/8" Star Washers (9). Start all four Patch Bolts before tightening any of them. Be careful not to pinch the Upright Wire (91).
8.With the help of a second person, hold the con- sole assembly near the Right Handrail (88) and the Left Handrail (not shown).
Connect the Upright Wire (91) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CON-
NECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN YOU TURN ON THE POWER.
Connect the Console Ground Wire (80) to the ground wire on the console assembly.
7 | 2 |
|
|
|
| 9 | 86 | 2 | 91 |
| 87 | |||
|
| |||
| 9 |
|
| |
| 64 |
|
| |
|
| 88 |
| 72 |
|
|
|
| |
8 | Console |
|
|
|
|
|
|
| |
| Assembly |
|
|
|
| 88 |
|
|
|
Ground | 80 |
Wire |
Console
91 Wire Console
Wire
91 
10