ProForm PFTL05099.0 warranty Bracket

Page 9

5.With the help of a second person, carefully tip the treadmill onto its right side. Have a second person hold the treadmill to prevent it from tipping. Do not pivot the Frame (45).

Attach a Wheel (66) to the Base (62) with a 3/8" x 1 1/2" Bolt (4) and a 3/8" Jam Nut (8) from the direction shown. Do not overtighten the Jam

Nut; the Wheel must turn freely.

6.Set the Left Upright Spacer (65) on the Base (62). Orient the Left Upright (64) so that the bracket is in the position shown.

Hold a Bolt Spacer (71) inside the lower end of the Left Upright (64). Insert a 3/8" x 4" Bolt (1) with a 3/8" Star Washer (9) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (71), 3/8" x 4" Bolt (1), and 3/8" Star Washer (9).

Hold the Left Upright (64) against the Left Upright Spacer (65). Partially tighten a 3/8" Jam Nut (8) with a 3/8" Star Washer (9) onto each 3/8" x 4" Bolt (1); do not fully tighten the Jam

Nuts yet.

With the help of a second person, tip the treadmill so that the Base (62) is flat on the floor.

5

66

8

 

 

 

62

45

 

4

 

 

 

 

6

 

64

1

65

Bracket

9

 

71

62

 

9

 

8

 

9

Image 9
Contents Model No. PFTL05099.0 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTOn the WEB Table of Contents Important Precautions Page Before YOU Begin Assembly Nut the Wheel must turn freely Jam Nuts yet Bracket Page Five Screws before tightening any of them Handrails 87, 88. Be careful not to pinch anySole assembly. Press the indicated sides Accessory Trays into the console assemBly first Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerSelect a preset workout HOW to USE a Preset WorkoutAdjust the incline level and shock cylinder firmness Enter your weight. See on Start the workoutHOW to USE the Stereo Sound System HOW to USE the Ifit Training ModeInformation Mode HOW to Adjust the Incline of the TreadmillHOW to Adjust the Shock Cylinders HOW to Move the Treadmill Troubleshooting Problem The power turns off during useCompatible with GFCI-equipped outlets Bottom Problem The walking belt slows when walked onTurn if the walking belt has shifted to Problem The shock cylinders make a knocking noiseExercise Guidelines HOW to Measure Your Heart RateExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. PFTL05099.0Exploded Drawing A-Model No Exploded Drawing B-Model No. PFTL05099.0 R0210A Exploded Drawing C-Model No. PFTL05099.0 R0210A Ordering Replacement Parts Limited WarrantyIcon Health & Fitness, Inc., 1500 S W., Logan, UT